"Watts Up" Mini-Power Analyzer for RC cars and planes
* Measures energy (Wh), charge (Ah), power (W) Current (A) and voltage (V) for each set of 4 - 60V, including NiCd, NiMH, and SLA, and battery Li-Ion Packs
* Connection to a battery of receiver to be used for the measurement at 0 V
* Captures current peaks and voltage minimums (sloping roof)
* Precise and accurate - 0.01 and 0.01 V, a current-voltage resolutions
* Rugged - handles 50 A continuous current and 100 A peak current at 60 V, 14 GA, 7 x 37 stranded wire high temperature silicone rubber insulated without connectors.
* Acts like a wire so does not affect the performance model. Precision current sensing resistor, with only 0.001 Ohm and a circuit consumes only 0.007 amps
* Uses DSP to ADC resolution and differential measurement amplifiers to increase noise immunity Factory calibration stores constants in EEPROM to increase to compensate for component tolerances
* One year warranty
Specifications:
* Voltage 0-60 V, resolution 0.01 V. This is a 14 series cell Li-poly pack!
* Current 0-100 A peak, 50 A continuous, resolution 0.01 A
* Charges 0-65 Ah, Ah Resolution 0.001. That's about 32 amps for two hours!
* 0-6500 W power, 0.1 W. The resolution is ~ 8.7 HP!
* Energy Wh 0-6500, Resolution 0.1 Wh This raises a model in space 50 pounds (65 km).!
* Operates from 4.0 to 60 V, 0 V receiver with optional battery
* 16 x 2 STN LCD
* Powerful, 8 MIPS micro-Controlle
Applications - designed specifically for batteries CR to help you:
Set * speed control voltages and currents of cut
* Optimize performance by comparing different configurations of propeller, engine, transmission, controller and battery
* Measure a full battery charge and compare it with when the charger claims done
* Check peak currents are safe for battery cables, cruise control, engine, and connectors
* Predicting the time of flight of the aircraft based on real conditions of your model
* Check the battery capacity and health and whether battery should be replaced
* Make sure that the minimum voltage under load is in accordance with specifications
* Check the power losses in the cabling and connectors.
* Fine-tuning your electric RC cars and planes to performance should not be a guessing game
* Measure consumption and energy consumption of any device with a battery, such as
* Battery shooting airsoft
* Bike battery lighting
* E-Bike and Scooter Battery
* Combine the power analyzer with our 2.4V - 7.2V, 7.2V - 12V, 24V NiMH universal smart chargers with 3.6 V - 14.8 V battery charger Li-Ion is the perfect tool to monitor the power of battery
No comments:
Post a Comment