#1 find Tenergy 36V 10A LiFePO4 Battery Charger

Tenergy 36V 10A LiFePO4 Battery Charger 

 

It is an adult, adolescent and youth - male and female for every single group has many versions of Razor scooters. Razor electric scooters, Laser MX dirt bikes, pocket rockets, pocket all go Kart, Dori Futa, dust, sand, quad stroller, all are battery-operated shaver can be easily obtained.When you create a razor scooter battery used to take to call attention to detail. Switch of electrical energy remains in the long term if it does not hold a charge longer, when it can get a step. The battery is used and how it is very careful to pay attention varies.Razr charger also can be obtained easily the class 2, UL list, battery chargers, particularly razors, electric scooters are made for style. There are two types of output voltage: 24 V battery charger they all are or 36V battery charger.Most of the product features 24-volt charger razor. MX500 and MX650 Dirt Bike only a 36-volt battery will run. Critical difference in battery charger, the charger is located on a label. This item will be your razor shaver battery charger used to determine the appropriate help.

Shaver can get the following output of the charger* 24V / cloth mothers (24 volt / 1 amp, which means) - Razor E100 Series Scooters features (e125, E100, E150, e175).* 24V / 1500 밀리 amps (24 volts / 1.five means amps) - E100 series scooters and carts and cars instead of the dirt bike * to MX500/MX650, razor electric scooters all the behavior of36V / 1670 밀리 amps (36 volts / 1.67 amps, which means), some razors, electric scooters, pocket wool, razor pocket rockets, including the works for 24-volt electrical appliances, carts, quad, sand, etc. to move the stroller.Shaver and Razor, but the batteries in the charger, but follow the clear recommendations adopted:· Before you connect the charger to the wall to connect scooter. If the very fact that the sum charged in the first scooter in front of you from the wall outlet and disconnect the charger and unplug it.My ride immediately after charging.Single at least every three months, the second to charge the battery.Discharged after earning the right one in the interior of the zoom, the rated voltage, it is generally considered to be bad, or are worn.To increase battery life, slow speed, and battery chargers are used whenever possible.Shaver is provided as a comprehensive package of products. So, you have the location of the extra elements are not any problems. Battery and charger that can be accessed by thousands.We all know that the battery does not last forever, and I want them, but they tend to be in the position of me. If you frequently use a razor scooter is not charging the battery, you must replace it with a few.Fortunately, your shaver battery provides a place to go on the internet, straight to your door, you would want to include other elements. This calls for because I have a small element is the place to go. You to completely customize your razor this web site can go to the World Wide Web.Razor Pocket Rocket for you, or if you have any other items needed for a great price for almost all the minor must find this site. Funny, you think of the shaver to charge the battery is maintained.

Tenergy 36V 10A LiFePO4 Battery Charger

Features:

1. Intelligent charger designed for 12 cell LiFePO4 battery packs.
2. Built-in cooling fan to ensure charger long service life.
3. Safety protection:
• Over Voltage Protection
• Short Circuit Protection
• Output Reverse Protection
4. Charging time:
• Charging Time= (1.41 * Ah rate of the pack) / 2.5A charge current
5. Built-in IC to cut-off power automatically when battery is fully charged.
6. LED indicators:
• LED 1 = Red = Power On
• LED 2 = Red = Charging
• LED 3 = Green = Fully Charged

• User Instructions:
• Check the output plug of this charger and make sure it is not loose.
• Before charging, please connect the charger's alligator clips to battery first: the "red" clip connects to the POSITIVE pole and the "black" connects to the NEGATIVE pole. After, connect the input power plug to the indoor power supply.
• The charger applies the intelligent charging method of constant current and constant voltage. The charger will automatically shut off when battery is fully charged. Unplug the input power supply then disconnect the output clips.
• When charger is not in use or finished charging, be sure to unplug input power supply.
• Indictor LED instruction:
  • "Charging" indicator shows "red" under normal charging state. It turns into "Green" when the battery is fully charged, the battery can be put into use at this time.
  • The charging voltage of this charger is 36V, and shut-off current is .5A. It can only be operated when connect with not fully charged battery.

Includes:

• Battery Charger
• Power Cable
• Manual

Technical Specifications:

Item	36V 5A Charger
Model	TN3605AL
Max Output Power	120W
Output Voltage	43.8V ±0.02Vdc
Output Current	2.5A
Rated Input Voltage	110Vac
Input Voltage Range	AC90-135V
AC Input Voltage Frequency	50∼60 Hz
Constant Current	5A±0.5A
Constant Voltage	43.8V ± 0.3V
Cut-off Current	0.5A
Power Efficiency	≥90% (Vin=110Vac, rated load)
Over Voltage Protection	YES
Software Over Voltage Protection	The charger software limits the maximum output voltage to a level suitable for the connected battery system
Thermal Protection	N/A
Current Limiting Protection	YES (At CC Mode)
Reverse Polarity Protection	When output wires are reversely connected to the battery the charger will not operate and will work normally when DC wires are correctly connected
Electric Strength Test Input-Output	1500Vac/10mA/1 min (No Breakdown)
Isolation Resistance Input-ground	≥10mΩ@500Vdc
Isolation Resistance Output-ground	≥10mΩ@500Vdc
Leakage Current	<3.5mA
Safety	CE/UL Compliant
High Temperature Ambient Operating	+40°C
Low Temperature	-10°C
High Temperature Storage	+70°C (Normal after recovery under normal temperature for 2 hours)
Low Temperature Storage	+40°C (Normal after recovery under normal temperature for 2 hours)
Random Vibration	20Hz to 2000Hz 3 Grms 20 hours per axis
Repetitive Shock	40g peak 3 orthogonal axes, 3+ and 3- in each axis, 11ms pulse width
Thermal Shock	-35°C to 75°C, <3min transition, 2.5 hours dwell, 200 cycle
Drop Test	BS EN60068-2-32:1993 TEST ED: free fall appendix B
AC Wire Length	1m length
DC Wire Length	1m length
Net Weight	1.2Kg
Dimensions	135mmX90mmX50mm (L*W*H)
Output Connector Type	XLR Connector
Casing	Aluminum

The charger has been calibrated to take account of the voltage drop in the DC output cables during operation, to prevent the possibility of over or under charging of the battery it is recommended the DC output cables are connected directly to the battery without modification.

Warning:

• Only for use with LiFePO4 4 cell battery pack (If used with battery pack of less cells will cause damage to battery and possible personal injury may occur).
• Unplug charger after use.
• To prevent electrical shock, DO NOT remove casing
• Be careful of high-voltage inside charger. If failure happens, please contact us. Users and non-professional technicians are prohibited to open the charger!
• Keep charger out of children's reach.
• The charger and battery belongs in indoor environment with good ventilation and good cooling system, Do not expose to humid, high temperature, flammable, explosive gas environments.
• Do not bring charger along during transportation to prevent shock damage!
• Read the instructions carefully before using.
• Damage caused by improper use is not covered by warranty.