Protection Circuit Module for 29.6V Li-ion Battery Pack (15A Limit)

Protection Circuit Module for 29.6V Li-ion Battery Pack (15A Limit) 

 

Features 

* Applies to 8 cells Li-ion/Li-polymer battery pack protection
* Internally Trimmed Charge and Discharge Voltage Limits
* Discharge Current Limit Detection
* High Quality and High Yield100% Tested before Shipment Working Voltage29.6VMaximal Working current15ADimension115mm x 80mm x 15mmWeight58g Electric PerformanceNo. Items Min Typ Max Unit 1 Charging voltage 33.76 34 V 2 Charging current 15 A 3 Discharging current 12 15 A 4 Current consumption 300 uA 5 Balance current for single cell 55 60 65 mA 6 Blance voltage for single cell 4.18 4.2 4.22 V 7 Overcharge detection voltage for single cell 4.3 4.325 4.35 V 8 Overcharge detection delay time 0.96 1.2 1.4 s 9 Overdischarge detection voltage for single cell 2.4 2.5 2.6 V 10 Overdischarge detection delay time 115 144 173 ms 11 Short circuit protection Exterior short circuit 12 Protection circuitry resistance 15 30 mΩ 13 Operating Temperature Range -40 85 C 14 Storage Temperature Range -40 125 C

Working Voltage: 29.6V
Maximal Working current: 15A
Dimension: 115mm x 80mm x 15mm
Weight: 58g

Electric Performance:
No.	Items	Min	Typ	Max	Unit
1	Charging voltage		33.76	34	V
2	Charging current			15	A
3	Discharging current		12	15	A
4	Current consumption			300	uA
5	Balance current for single cell	55	60	65	mA
6	Blance voltage for single cell	4.18	4.2	4.22	V
7	Overcharge detection voltage for single cell	4.3	4.325	4.35	V
8	Overcharge detection delay time	0.96	1.2	1.4	s
9	Overdischarge detection voltage for single cell	2.4	2.5	2.6	V
10	Overdischarge detection delay time	115	144	173	ms
11	Short circuit protection	Exterior short circuit
12	Protection circuitry resistance		15	30	mΩ
13	Operating Temperature Range	-40		85	C
14	Storage Temperature Range	-40		125	C

AT: Tenergy 11.1V 5800mAh LIPO PCB Protected Battery Pack w/ Bare Leads

AT: Tenergy 11.1V 5800mAh LIPO PCB Protected Battery Pack w/ Bare Leads 

 

3cell Li-Polymer 5800mAh battery pack. Internal PCB for battery protection; over-charging cut-off13Vover-discharging cut-off7.2VMaximum discharge rate6.5 Amps. Maximum charging rate2AmpsDimensions168mm x 57mm x 22mmWeight372 grams Built by 3.7V 5800mAh (7548165) and11.1V PCB 6.5A Wires22AWG 6" long silicone wiresRecommended charger to charge this battery pack. CautionImproper use like overcharging and over discharging can cause explosion and/or fire.User of the battery is required tohave the sufficient Li-polymer charging and use experience and technical knowledge. Tenergy or All-Battery.com are not responsible for any damage or injury caused by misuse, misunderstanding or abuse of this product.

DGR-A # Li-Polymer 3.7V 10Ah 10C (9759156) Battery Cell (DGR-A)

Li-Polymer 3.7V 10Ah 10C (9759156) Battery Cell (DGR-A) 

 

Single cell Li-Polymer 10000mAh 5C battery.5C continuous discharge rate of 50 amps with 10C 100 amp burst current.Maximum charge rate 10 Amps.Dimensions156mm x 59mm x 9.7mmWeight205 grams500-1000 times cycle life UN approvedDownload Full Specification Sheet here.

Card: 2 RCR123A 3.0V (3.2V NOM) 750mAh LiFePO4 Rechargeable Batteries with a Smart Charger

Card: 2 RCR123A 3.0V (3.2V NOM) 750mAh LiFePO4 Rechargeable Batteries with a Smart Charger 

Charger Features Worldwide usage. Auto AC power adjust from 100-240V. Smart, build-in microprocessor automatically switch off when batteries are fully charged. Safe, build-in IC provides various protection, thermal protection, overcharge protection, short-circuit protection, mechanical and electrical protection against reversal polarity, and auto defective battery identification. Convenient, 12V car cigarette lighter plug for on the road charging. Compact ( 2.5 x 4 x 1 inch ), Light weight ( 5 oz only ), include charger and all accessories. Charge 1 to 2 RCR123A from 1.5 hours to 3 hours. Peak voltage of 3.0V Li-Ion will be 3.60V after fully charged.This charger is only compatible with RCR123A 750mAh batteries. This charger is not compatible with 900mAh RCR123A Batteries.New Chemical LiFePO4Li-Ion batteryRechargeable LiFePO4 RCR123A 3.0V 750mAhBatteryLife cycleup to 1000 cycles 100% Compatible with Disposable CR123A Batteries Working Voltage:3.2V and Peak Voltage3.6V Charging cut-off voltage 3.6VDischarge cut-off voltage2.2V Please never overdischarge battery below 2.2V/cell Charge the this battery with LiFePO4 RCR123A smart charger. Capacity:Nominal450mAh Maximum:750 mAhMaximum discharging rate:< 550 mAMaximum charge current<550 mACell's dimension:17mm Dia. x 34.5mm H.Weight0.6 oz (18 grams). NOT COMPATIBLE WITH SUREFIRE FLASHLIGHT. DON'T USE THESE BATTERIES WITH ANY SUREFIRE FLASHLIGHTS.